Chapter 13 Log Screens; Configuring View Log; Figure 88 View Log; Table 51 View Log - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

This chapter contains information about configuring general log settings and viewing the
ZyAIR's logs. Refer to the appendix for example log message explanations.

13.1 Configuring View Log

The web configurator allows you to look at all of the ZyAIR's logs in one location.
Click the LOGS links under ADVANCED to open the View Log screen. Use the View Log
screen to see the logs for the categories that you selected in the Log Settings screen (see
Figure 89). Options include logs about system maintenance, system errors and access control.
You can view logs and alert messages in this page. Once the log entries are all used, the log
will wrap around and the old logs will be deleted.
Click a column heading to sort the entries. A triangle indicates the direction of the sort order.

Figure 88 View Log

The following table describes the labels in this screen.

Table 51 View Log

LABEL
Display
Time
Message
Source
Destination

Chapter 13 Log Screens

C
DESCRIPTION
Select a log category from the drop down list box to display logs within the
selected category. To view all logs, select All Logs.
The number of categories shown in the drop down list box depends on the
selection in the Log Settings page.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming
packet.
This field lists the destination IP address and the port number of the incoming
packet.
G-3000H User's Guide
H A P T E R
Log Screens
1 3
157