G-3000H User's Guide
Figure 151 Menu 24 System Maintenance
Figure 152 Valid CI Commands
Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
G-3000H> ?
Valid commands are:
sys
ip
wcfg
G-3000H>
24.1.1 CNM
Vantage CNM (Centralized Network Management) is a browser-based, global management
solution that allows an administrator to easily configure, manage, monitor and troubleshoot
ZyXEL devices located worldwide. See the Vantage CNM User's Guide for details.
If you allow your ZyXEL device to be managed by Vantage CNM, then you should not
configure it without notifying the Vantage CNM administrator.
24.1.2 Configuring Vantage CNM
Vantage CNM is disabled on the device by default. You can configure Vantage CNM on your
ZyXEL device by using the following commands.
220
Menu 24 - System Maintenance
1.
System Status
2.
System Information and Console Port Speed
3.
Log and Trace
4.
Diagnostic
5.
Backup Configuration
6.
Restore Configuration
7.
Upload Firmware
8.
Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
exit
ether
bridge
certificates
wlan
8021x
Chapter 24 System Maintenance and Information