Figure 42 Configuring Ssid; Table 30 Configuring Ssid - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

Figure 42 Configuring SSID

The following table describes the labels in this screen.

Table 30 Configuring SSID

LABEL
Name
SSID
VLAN
Second Rx VLAN
Security
RADIUS
QoS
L2 Isolation
Enable MAC Filtering
Apply
Reset
Chapter 7 Multiple ESS, SSID and VLAN
DESCRIPTION
Type a name to identify this SSID profile on the ZyAIR.
Type a name to identify this wireless profile on the network. When a wireless
client scans for an AP to associate, this is the identity that is broadcast and
viewed in the wireless client utility.
Enter a number from 1 to 4094. Incoming traffic from the WAN is tagged with
this ID before it is sent to the LAN interface. Different SSID profiles can use the
same or different VLAN IDs. This allows you to split wireless stations into
groups using similar VLAN IDs.
Enter a number from 1 to 4094, but different to the VLAN ID entered.
Traffic received from the LAN interface is tagged with a Second Rx VLAN and
forwarded to this SSID profile on the wireless LAN interface.
Select a security profile. See
information.
Select a RADIUS profile from the drop-down list box, if you have a RADIUS
server configured. If you do not need to use RADIUS authentication, ignore
this field.
With Multi-ESS, the ZyAIR ignores the ToS in the packet headers and uses a
single QoS priority level for all of an ESS's traffic.
Select the Quality of Service priority for this ESS's traffic. See
page 60 for more information on the priority levels.
Select Enable from the drop down list box to activate layer-2 isolation.
Select Enable from the drop down list box to activate MAC address filtering.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
G-3000H User's Guide
Configuring Security on page 80 for more
Table 10 on
99