System Statistics; Figure 91 System Status: Show Statistics; Table 54 System Status: Show Statistics - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

G-3000H User's Guide

14.2.1 System Statistics

Read-only information here includes port status, packet specific statistics and bridge link
status. Also provided are "system up time" and "poll interval(s)". The Poll Interval field is
configurable.

Figure 91 System Status: Show Statistics

The following table describes the labels in this screen.

Table 54 System Status: Show Statistics

LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
Bridge Link #
Active
Remote Bridge MAC
Address
Status
162
DESCRIPTION
This is the Ethernet or wireless port.
This shows the port speed and duplex setting if you are using Ethernet
encapsulation for the Ethernet port.
This shows the transmission speed only for wireless port.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This shows the transmission speed in bytes per second on this port.
This shows the reception speed in bytes per second on this port.
This is total amount of time the line has been up.
This is the index number of the bridge connection.
This shows whether the bridge connection is activated or not.
This is the MAC address of the peer device in bridge mode.
This shows the current status of the bridge connection, which can be Up or
Down.
Chapter 14 Maintenance