Figure 16 Password.
The following table describes the labels in this screen.
Table 8 Password
LABEL
Old Password
New Password
Retype to Confirm
Apply
Reset
4.4 Configuring Time Setting
To change your ZyAIR's time and date, click the SYSTEM link under ADVANCED and then
the Time Setting tab. The screen appears as shown. Use this screen to configure the ZyAIR's
time based on your local time zone.
Chapter 4 System Screens
DESCRIPTIONS
Type in your existing system password (1234 is the default password).
Type your new system password (up to 31 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype your new system password for confirmation.
Click Apply to save your changes back to the ZyAIR.
Click Reset to reload the previous configuration for this screen.
G-3000H User's Guide
53