G-3000H User's Guide
5 Type a VLAN Group ID. This should be the same as the management VLAN ID on the
ZyAIR.
6 Enable Tx Tagging on the port which you want to connect to the ZyAIR. Disable Tx
Tagging on the port you are using to connect to your computer.
7 Under Control, select Fixed to set the port as a member of the VLAN.
Figure 56 VLAN-Aware Switch - Static VLAN
8 Click Apply. The following screen displays.
Figure 57 VLAN-Aware Switch
9 Click VLAN Status to display the following screen.
Figure 58 VLAN-Aware Switch - VLAN Status
Follow the instructions in the Quick Start Guide to set up your ZyAIR for configuration. The
ZyAIR should be connected to the VLAN-aware switch. In the above example, the switch is
using port 1 to connect to your computer and port 2 to connect to the ZyAIR:
1 In the ZyAIR web configurator click VLAN under ADVANCED to open the VLAN
setup screen.
2 Select the Enable VLAN Tagging check box and type a Management VLAN ID (10 in
this example) in the field provided.
116
see Figure
55.
Chapter 9 VLAN