Layer-2 Isolation Examples; Figure 46 Layer-2 Isolation Configuration Screen; Table 31 Layer-2 Isolation Configuration - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

Figure 46 Layer-2 Isolation Configuration Screen

The following table describes the labels in this screen.

Table 31 Layer-2 Isolation Configuration

LABEL
Enable Layer-2
Isolation
Allow devices with
these MAC
addresses
Set
MAC Address
Apply
Reset

8.2.1 Layer-2 Isolation Examples

The following section shows you example layer-2 isolation configurations on the ZyAIR (A).
Chapter 8 Other Wireless Configurations
DESCRIPTION
Select the Enable Layer-2 Isolation check box to enable layer-2 isolation on the
ZyAIR.
When you select the Enable Layer-2 Isolation check box and save this
configuration screen, the Enable Intra-BSS Traffic check box in the Wireless
configuration screen is cleared. This means that wireless clients connected to the
ZyAIR cannot communicate with one another. This would be appropriate in a
hotspot application, for example, in a hotel where wireless clients can access the
Internet, but cannot communicate with other wireless clients or AP's.
If you want wireless clients associated with the ZyAIR to be able to communicate
with each other, you must select the Enable Intra-BSS Traffic check box in the
Wireless configuration screen.
These are the MAC address of a wireless client, AP, computer or router. A wireless
client associated with the ZyAIR can communicate with another wireless client,
AP, computer or router only if the MAC addresses of those devices are listed in
this table.
This is the index number of the MAC address.
Type the MAC addresses of the wireless client, AP, computer or router that you
want to allow the ZyAIR associated wireless clients to have access to in these
address fields. Type the MAC address in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
G-3000H User's Guide
105