Figure 153 Cnm Cl; Table 79 Cnm Commands - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

Figure 153 CNM CL

G-3000H>cnm
active
reset
G-3000H>
The following table describes the commands in this screen. All commands begin with "cnm"
so for example, type "cnm active 1" to enable Vantage CNM on your device.

Table 79 CNM Commands

COMMAND
active
sgid
Chapter 24 System Maintenance and Information
sgid
simulate
SUB COMMAND
<0:Disable
1:Enable CNM via WAN
2:Enable CNM via WAN
or LAN>
0
1
2
Last Register Time: 0-0-0
0:0:0
managerIp debug
encrykey encrymode
DESCRIPTION
This displays the ZyXEL device connection status with
Vantage CNM and displays the last date and time that the
ZyXEL device registered with the Vantage CNM server.
If Vantage CNM is disabled on the ZyXEL device, active
0 is displayed.
If Vantage CNM is enabled on the ZyXEL device using a
WAN connection, active 1 is displayed.
If Vantage CNM is enabled on the ZyXEL device using a
WAN or LAN connection, active 2 is displayed.
Use this command to disable Vantage CNM on your
ZyXEL device.
Use this command to enable Vantage CNM on your
ZyXEL device using a WAN connection.
Use this command to enable Vantage CNM on your
ZyXEL device using a WAN or LAN connection.
For example if Last Register Time 2004-11-20 10:34:23 is
displayed then the last date the device registered with
Vantage CNM was the 20th November 2003 at 10:34 PM.
The last register time displays the last date (year-month-
date) and time (hours : minutes : seconds) that the ZyXEL
device registered with Vantage CNM. It displays all
zeroes if it has not yet registered with the Vantage CNM
server.
This command displays your ZyXEL device's unique ID in
Vantage CNM.
G-3000H User's Guide
221