Configuring Local User Database; Figure 38 Local User Database; Table 27 Local User Database - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

Table 26 RADIUS
LABEL
Accounting Server IP
Address
Accounting Server Port Enter the port number of the external accounting server. The default port
Share Secret
Apply
Reset

6.15 Configuring Local User Database

To change your ZyAIR's local user database, click the WIRELESS link under ADVANCED
and then the Local User Database tab. The screen appears as shown.

Figure 38 Local User Database

The following table describes the labels in this screen.

Table 27 Local User Database

LABEL
Active
User Name
Password
Apply
Reset
Chapter 6 Wireless Security Configuration
DESCRIPTION
Enter the IP address of the external accounting server in dotted decimal
notation.
number is 1813. You need not change this value unless your network
administrator instructs you to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external authentication server and the ZyAIR. The key must be
the same on the external authentication server and your ZyAIR. The key is not
sent over the network.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select this check box to activate the user profile.
Enter the username (up to 31 characters) for this user profile.
Type a password (up to 31 characters) for this user profile. Note that as you
type a password, the screen displays a (*) for each character you type.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
G-3000H User's Guide
91