Restore Using Ftp; Uploading Firmware And Configuration Files; Figure 142 Menu 24.6 Restore Configuration; Figure 143 Menu 24.7 System Maintenance: Upload Firmware - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

23.3.1 Restore Using FTP

For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file
upload in this chapter.

Figure 142 Menu 24.6 Restore Configuration

To transfer the firmware and the configuration file, follow the procedure
below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your router. Then type "root" and
SMT password as requested.
3. Type "put backupfilename rom-0" where backupfilename is the name of
your backup configuration file on your workstation and rom-spt is the
Remote file name on the router. This restores the configuration to your
router.
4. The system reboots automatically after a successful file transfer.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on restoring using TFTP (note that you must
remain in the menu to back up using TFTP), please see your router manual.

23.4 Uploading Firmware and Configuration Files

Menu 24.7 – System Maintenance – Upload Firmware allows you to upgrade the firmware
and the configuration file.
Note: WARNING! PLEASE WAIT A FEW MINUTES FOR THE ZYAIR TO RESTART
AFTER FIRMWARE OR CONFIGURATION FILE UPLOAD. INTERRUPTING THE
UPLOAD PROCESS MAY PERMANENTLY DAMAGE YOUR ZYAIR.

Figure 143 Menu 24.7 System Maintenance: Upload Firmware

Menu 24.7 - System Maintenance - Upload Firmware
The configuration data, system-related data, the error log and the trace log are all stored in the
configuration file. Please be aware that uploading the configuration file replaces everything
contained within.
Chapter 23 Firmware and Configuration File Maintenance
Menu 24.6 – Restore Configuration
Press ENTER to Exit:
1. Upload System Firmware
2. Upload System Configuration File
Enter Menu Selection Number:
G-3000H User's Guide
213