Figure 82 Remote Management: Www; Table 45 Remote Management: Www - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

Figure 82 Remote Management: WWW

The following table describes the labels in this screen.

Table 45 Remote Management: WWW

LABEL
HTTPS
Server Certificate
Authenticate
Client Certificates
Server Port
Server Access
Secured Client IP
Address
WWW
Server Port
Chapter 12 Remote Management Screens
DESCRIPTION
Select the Server Certificate that the ZyAIR will use to identify itself. The ZyAIR is
the SSL server and must always authenticate itself to the SSL client (the computer
which requests the HTTPS connection with the ZyAIR).
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the ZyAIR by sending the ZyAIR a certificate. To do that the
SSL client must have a CA-signed certificate from a CA that has been imported as
a trusted CA on the ZyAIR (see the appendix on importing certificates for details).
The HTTPS proxy server listens on port 443 by default. If you change the HTTPS
proxy server port to a different number on the ZyAIR, for example 8443, then you
must notify people who need to access the ZyAIR web configurator to use "https://
ZyAIR IP Address:8443" as the URL.
Select a ZyAIR interface from Server Access on which incoming HTTPS access is
allowed.
You can allow only secure web configurator access by setting the HTTP Server
Access field to Disable and setting the HTTPS Server Access field to an
interface(s).
A secure client is a "trusted" computer that is allowed to communicate with the
ZyAIR using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
G-3000H User's Guide
149