Figure 40 Wireless: Multiple Ess; Table 28 Wireless: Multiple Ess - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

Figure 40 Wireless: Multiple ESS

The following table describes the labels in this screen.

Table 28 Wireless: Multiple ESS

LABEL
Operating Mode
Choose Channel ID
Scan
RTS/CTS Threshold
Fragmentation
Threshold
Chapter 7 Multiple ESS, SSID and VLAN
DESCRIPTION
Select MESSID in this field to display the screen as shown
Set the operating frequency/channel depending on your particular region. To
manually set the ZyAIR to use a channel, select a channel from the drop-down
list box. Click MAINTENANCE and then the Channel Usage tab to open the
Channel Usage screen to make sure the channel is not already used by
another AP or independent peer-to-peer wireless network. To have the ZyAIR
automatically select a channel, click Scan instead. Refer to the Wizard Setup
chapter for a little more information on channels.
To have the ZyAIR automatically select a channel, click Scan instead.
(Request To Send) The threshold (number of bytes) for enabling RTS/CTS
handshake. Data with its frame size larger than this value will perform the
RTS/CTS handshake. Setting this attribute to be larger than the maximum
MSDU (MAC service data unit) size turns off the RTS/CTS handshake. Setting
this attribute to zero turns on the RTS/CTS handshake. Enter a value between
800 and 2432.
The threshold (number of bytes) for the fragmentation boundary for directed
messages. It is the maximum data fragment size that can be sent. Enter a
value between 800 and 2432.
G-3000H User's Guide
95