Back To Factory Defaults; Restart Screen; Figure 101 Configuration Upload Error; Figure 102 Reset Warning Message - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

G-3000H User's Guide

Figure 101 Configuration Upload Error

14.6.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyAIR to its factory defaults as shown on the screen. The following warning screen
will appear.

Figure 102 Reset Warning Message

You can also press the RESET button on the side panel to reset the factory defaults of your
ZyAIR. Refer to the section on resetting the ZyAIR for more information on the RESET
button.

14.7 Restart Screen

System restart allows you to reboot the ZyAIR without turning the power off.
Click MAINTENANCE, and then Restart. Click Restart to have the ZyAIR reboot. This
does not affect the ZyAIR's configuration.

Figure 103 Restart Screen

170 Chapter 14 Maintenance