Table of Contents
Advertisement
5 Move the MTS cabinet near to the mounting brackets.
6 Move the MTS backwards ensuring that the rear leveling feet of the MTS locate in the
corresponding cups in the rear mounting brackets.
7 Push the front brackets over the corresponding leveling feet and swing them until they engage
the screws.
8 Fully tighten the screws in the front brackets, see the following figure.
Figure 19: MTS – Mounting Brackets and the Cabinet
4.4.4
Installing the Cabinet Using the Mounting Plate
When and where to use:
Follow this process to mount the cabinet using the mounting plate.
Process:
1 Install the mounting plate to the floor, see
2 Secure the cabinet to the mounting plate, see
95.
NOTICE: Recommended clearances are shown in
Layout on page 65
MTS 2, in
12: Suggested Expansion Cabinet Site Layout on page 70
4.4.4.1
Mounting Plate
NOTICE: MTS LiTE/MTS 2 and MTS 4/Expansion Cabinet mounting plates have different size
and hole positions.
for MTS LiTE,
Figure 8: Suggested MTS 2 Site Layout on page 66
Figure 10: Suggested MTS 4 Site Layout on page 68
Mounting Plate on page
Securing Cabinet to a Mounting Plate on page
Figure 6: Suggested MTS LiTE Site
for Expansion Cabinet.
6802800U74-AN
Chapter 4: Hardware Installation
93.
for MTS 4, and in
Figure
for
93
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
