Ethernet Site Link Retrofit Kit; Figure 80: Mts 4 Junction Panel E1/X.21 And Ethernet Site Link Connectors; Table 26: Junction Panel Ethernet Site Link Connector Pins - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

For dimetra x core, dimetra express, dimetra ip scalable (dips), dimetra ip compact (dipc)/scalable.
Table of Contents

Advertisement

Figure 80: MTS 4 Junction Panel E1/X.21 and Ethernet Site Link Connectors

Previous version of the MTS 2 Junction Panel contains no breakouts while the previous version of the
MTS 4 Junction Panel contain an AUX breakout. To gain Ethernet site link functionality on those
previous versions of MTS 2 and MTS 4 Junction Panels, use the MTS Ethernet Retrofit Kit. See
Ethernet Site Link Retrofit Kit on page
The Site Controller connects to the MTS Link1 and Link2 connectors through an internal extension
cable.
For more information, see
The following table shows the pin assignment for Ethernet Site Link connection. The Ethernet Site Link
MDIX connector pin out applies to both Link1 and Link2. The pin definitions on the Site Controller are
different from the Link1 and Link2 connectors on the Junction Panel.

Table 26: Junction Panel Ethernet Site Link Connector Pins

Pin No
Function
1
RX+
2
RX-
3
TX+
4
Not used
5
Not used
6
TX-
7
Not used
8
Not used
4.10.1

Ethernet Site Link Retrofit Kit

The Ethernet Site Link Retrofit kit is used convert one E1 output to two Ethernet outputs on MTS 2
Junction Panels not equipped with such Ethernet outputs in order to get Ethernet Site-link functionality.
On MTS 4 Junction Panels, the Ethernet Site link Retrofit kit is used to convert existing E1 and AUX
outputs in order to get Ethernet site link functionality.
The following Ethernet Site Link Retrofit Kits can be used for older versions of the Junction Panels
where Ethernet connectors are missing (only E1 present):
GMKN4746A - for MTS 2 with new version of junction panel.
GMKN4747A - for MTS 2 with old version of junction panel.
GMKN4745A - for MTS 4
GMKN4744A - for MTS 4 Expansion Cabinet
NOTICE: GMKN4744A contains only the cables for the expansion cabinet. GMKN4745A
needs to be ordered separately for the MTS 4 Prime Cabinet.
135.
Ethernet Site Link Cabling on page
Chapter 4: Hardware Installation
X.21
Ethernet Site Links
E1
167.
6802800U74-AN
135

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents