Connecting Ethernet Site Link Retrofit Kit For Mts 4 With Expansion Cabinet (Old Jp); Connecting Ethernet Site Link Retrofit Kit For Mts 4 With Expansion Cabinet (New Jp) - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

NOTICE: In
page 169 and
page 172; and
Controller on page 171
Site Controller on page
old Junction Panel is equivalent to Link2.
4.10.1.4
Connecting Ethernet Site Link Retrofit Kit for MTS 4 with Expansion
Cabinet (old JP)
When and where to use:
Follow this procedure to gain Ethernet Site Link functionality from the E1 and AUX connectors on the
previous type of MTS 4 Junction Panel. The procedure applies to an MTS Expansion Cabinet
configuration with single Site Controller.
Procedure:
1 On the MTS Prime Cabinet, remove existing E1 cable from E1 connector on Junction Panel.
2 Connect the open E1 connector on the Junction Panel with the RJ45 coupler (3066562B01).
3 Bend AUX breakout and insert the second RJ45 coupler (3066562B01).
4 Follow Table 48: Ethernet Site Link Cabling for MTS 4 Expansion Cabinet with Single Site
Controller on page 174
with Single Site Controller on page 175
4.10.1.5
Connecting Ethernet Site Link Retrofit Kit for MTS 4 with Expansion
Cabinet (new JP)
When and where to use:
Follow this procedure to gain Ethernet Site Link functionality from the Link1 and Link2 connectors on
the newer type of MTS 4 Junction Panel. The procedure applies to an MTS Expansion Cabinet
configuration with single or dual Site Controllers.
Procedure:
1 Bend open and connect the open Link1 connector on the Junction Panel with the RJ45 coupler
(3066562B01).
2 Bend open and connect the open Link2 connector on the Junction Panel with the RJ45 coupler
(3066562B01).
3 Attach remaining cables.
• For configurations with single Site Controller, follow
MTS 4 Expansion Cabinet with Single Site Controller on page 174
Site Link Cabling for MTS 4 Expansion Cabinet with Single Site Controller on page 175
further cabling and connections.
• For configurations with dual Site Controller, follow
MTS 4 Expansion Cabinet with Dual Site Controller on page 175
Site Link Cabling for MTS 4 Expansion Cabinet with Dual Site Controller on page 177
further cabling and connections.
Table 46: Ethernet Site Link Cabling for MTS 4 with Single Site Controller on
Table 47: Ethernet Site Link Cabling for MTS 4 with Dual Site Controller on
Figure 102: Ethernet Site Link Cabling for MTS 4 with Single Site
and Figure 103: Ethernet Site Link Cabling for MTS 4 with Dual
173E1 on old Junction Panel is equivalent to Link1 and AUX on
and Figure 104: Ethernet Site Link Cabling for MTS 4 Expansion Cabinet
for further cabling and connections.
Chapter 4: Hardware Installation
Table 48: Ethernet Site Link Cabling for
and Figure 104: Ethernet
Table 49: Ethernet Site Link Cabling for
and Figure 105: Ethernet
6802800U74-AN
for
for
137