Site Controller - Front Panel Switches; Site Controller - Front Panel Connectors; Table 87: Site Controller - Front Panel Switches; Table 88: Site Controller - Front Panel Connectors - Motorola MTS LiTE Installation, Configuration And Basic Service Manual

LED/Port
LED
Name
LED1
6
LED1
7
LED1
Exp.Cab.
8
8.2.1.2
Site Controller – Front Panel Switches

Table 87: Site Controller - Front Panel Switches

Switch Name Switch Function
Reset The front-panel switch can be used to either generate an interrupt to the pro-
cessor or to initiate a Hard Reset.
• Push and hold (1 second) to generate interrupt.
• Push and hold (>3 seconds) for Hard Reset.
8.2.1.3
Site Controller – Front Panel Connectors

Table 88: Site Controller - Front Panel Connectors

Connector Name
POWER SUPPLY
BR
CAN
Position Controlled by
Port 7
LED2
Port 8
LED1
Port 8
LED2
Connector To/From
Type
MOLEX (2 Pin) PSU
RJ45 BR
RJ45 BR
Chapter 8: Site Controller
Indication
• GREEN: Primary E1 OK (no
LOS (Loss Of Signal)).
• AMBER: Errors FE, CRC, BPV,
PD.
• RED: Primary E1 failure LOS.
• OFF: Secondary E1 not config-
ured.
• GREEN: Secondary E1 OK (no
LOS (Loss Of Signal)).
• AMBER: Errors FE, CRC, BPV,
PD.
• RED: Secondary E1 failure
LOS.
• OFF: Ethernet link not present.
• GREEN: Ethernet link present.
• OFF: Ethernet activity not
present.
• YELLOW: Ethernet activity
present.
Comment
28.5 VDC
Ethernet
CAN Bus connection
6802800U74-AN
301