Table of Contents
Advertisement
center frequency], in that way, tested spectrum peak point
is displayed in the middle of screen, and frequency values
and amplitude values of marker are displayed in the upper
right of screen grid.
4. Read measurement results
Input signal (frequency: 300MHz, amplitude: -10dBm),
results obtained by the measurement of UTS1000 Series
Spectrum Analyzer are shown as Figure 2-6:
Figure 2-6 View of Measured Signal
12
3. Descriptions of Menu
This chapter provides function maps of keys on the
panel of spectrum analyzer, and elaborately defines
meanings of every menu.
3.1 Menu Maps
This chapter provides function maps of relevant menu keys
on the panel of spectrum analyzer in alphabetical order.
Please refer to next section for the meanings of every menu.
AMP
BW/SWP
FREQ
MARKER
MEAS
MODE
PEAK
SPAN
SYS
TRACE
Advertisement
Table of Contents
