Table of Contents
Advertisement
and peak threshold.
3.3.10.4 [Right peak]
Search a peak on the right of current frequency marker's
position. Next peak must satisfy standards of current peak
and peak threshold.
3.3.10.5 [Frequency marker
Set center frequency equal to frequency marker's frequency.
This function enables you to quickly move signal in the
center of screen.
3.3.10.6 [Min. value search]
Place a frequency marker at the valley of trace, and this
frequency marker's frequency and amplitude is displayed
in the upper right of screen.
3.3.10.7 [Peak search On Off]
Set peak search mode, default to off. Peak is automatically
searched if this function is on.
3.3.11
SYS
Operations related with system: system information,
language, date and time, network, start-up/reset, file,
save, print, display, backlight adjustment, user calibration
and system service.
3.3.11.1 [System information ]
View system information or latest messages.
center frequency]
3.3.11.2 [System information]
System information includes following information: serial
number, equipment model, firmware version, temperature,
local network, IP address, subnet mask, gateway, network
card's physical address, listening port, power supply mode,
battery state.
3.3.11.3 [System log]
View update records of instrument system.
3.3.11.4 [Local language
Soft menu of language setting pops up. Select language
displayed in Chinese or English in the spectrum analyzer
as required.
]
57
Advertisement
Table of Contents
