Table of Contents
Advertisement
Please keep damaged packing or vibration-proof
materials until instrument has been fully inspected and
passed electrical properties and mechanical tests. As for
standard accessories, check whether some of them are
missing according to "Packing List" inside packing case.
2. Check complete instrument
In case of any mechanical damages or loss, or instrument
failing to pass electrical properties and mechanical tests,
please contact with our Company.
3. Connect to power
Spectrum analyzer is supplied by AC/DC power adapter or
rechargeable battery.
2.3.2. Connect with Power Adapter
Please use power cord provided as accessory to connect
adapter with spectrum analyzer. Please refer to descriptions
specified in Section "Side Panel" for specifications of
adapter.
2.3.3. Power Supply of Battery
Please assemble battery provided as accessory to spectrum
analyzer at battery installing-removing chamber. Please
refer to descriptions specified in Section "Side Panel" for
8
battery and battery installing-removing chamber.
2.3.4. Start-up
After connecting with power adapter or installing battery,
press Power-On key
on the front panel to open spectrum
analyzer, and you will know start-up initialization process
information by start-up system loading progress indication.
After start-up picture, sweep frequency curve appears on
the screen.
2.3.5. Charging of Battery
Please install battery according to descriptions specified
in Section "The use of Battery", and then connect with
power adapter. Whether spectrum analyzer is in power-on
mode or standby mode, battery can be charged, time
required for full battery power is 4 hours.
Press Power-On Key
on the front panel to open spectrum
analyzer, press "System"
and you can read power supply mode and battery power in
"System information"
key
"System information",
Advertisement
Table of Contents
