Table of Contents
Advertisement
Table 2-3 Descriptions of Side Panel
No.
Description
External trigger signal input
BNC interface
Reference clock input/output
BNC interface
USB interface
2.2.1 AC/DC Power Adapter
INPUT: AC voltage: 100V-240V, frequency: 50/60Hz,
rated current: 1.5A;
OUTPUT: output DC voltage: +9V, rated output current:
4000mA.
2.2.2 Master USB
Spectrum analyzer can be connected with external USB
equipment as "master equipment".
Such interface supports general USB drives, and is able to
read and write data and documents.
2.2.3 Battery
UTS1000 Series Spectrum Analyzer adopts rechargeable
No.
Description
Earphone interface
Power adapter interface
Battery installing-removing
chamber
battery. Battery output voltage range is 7V-9V; battery is
6000mAh large-capacity lithium battery.
2.2.4 Trigger Input
External trigger signal is input to spectrum analyzer's
trigger port through BNC interface, product port is
marked as "TRIG IN".
2.2.5 Reference Clock Input/Output
When set internal reference, output 10MHz reference clock
from this interface; when set external reference, user can
input 10MHz reference clock from this interface for
instrument. Product port is marked as "REF IN/OUT".
2.3 Preparations before use
2.3.1. General Check
When you receive new spectrum analyzer, please check it
by following steps below.
1. Check whether there is any damage caused during
transportation, whether accessories are complete.
7
Advertisement
Table of Contents
