UNI-T UTS1000 Series Operating Manual page 36

Table 3-1 Descriptions of Basic Functions (continued)
Function key Access key
[System
Enter factory debugging interface by pressing
SYS
service ]
this key.
Soft menu related with track and wave
——
TRACE
detection pops up.
[Trace] Select track register which is operable at
TRACE
1 2 3 4 5
present.
[Refresh]
Refresh current curve.
TRACE
In track register, display and hold input
[Max. hold] TRACE
signal's max. response.
In track register, display and hold input
[Min. hold]
TRACE
signal's min. response.
Clear contents stored in track register from
[Blanking]
TRACE
display area.
Display contents stored in current track
[View] TRACE
register, no refresh.
Soft menu for arithmetical operation related
[Trace
TRACE
with trace pops up.
operation ]
Get contents in track register 1 and track
[Trace
[1 2]
register 2 exchanged, and then set track 1
operation ]
and track 2 in display mode at the same time.
Subtract value of display line from track
[Trace
register 2, and then put the result back to
[2-DL 2]
operation ]
track register 2.
Get contents in track register 2 and track
[Trace
register 3 exchanged, and then set track 2
[2 3]
operation ]
and track 3 in display mode at the same time.
Descriptions
[Wave detection
[Positive peak]
[Negative peak]
Get contents in track register 1 transferred to
[Trace
[1 3]
track register 3, and then set track 3 in
operation ]
display mode.
Get contents in track register 2 transferred
[Trace
[2 3] to track register 3, and then set track 3 in
operation ]
display mode.
Soft menu for the setting of wave detection
TRACE
mode ]
mode pops up.
[Wave detection
[Auto] Set wave detection mode as auto mode.
mode ]
When noise is detected, this wave detection
[Wave detection mode alternately displays positive peak
[Normal]
mode ] andnegative peak. Otherwise, only positive
peak is displayed.
[Wave detection As for video signal, select positive peak
mode ]
wave detection mode.
As for video signal, select negative peak
[Wave detection
mode ]
wave detection mode.
[Wave detection
Sample video signal, sample wave detection
[Sampling]
mode ]
mode.
33