Main Menu - UNI-T UTD4000 Operating Manual

Uni-Trend Technology (Chengdu) Ltd

2.2 Main menu

Fig 2-1 shows four menus under the main menu on the top left corner: document, function, waveform
refresh and help. Their operation instructions are as follows:
1. Document
Load : This means saving the oscilloscope communication and control software to the
computer hard disk or other storage media.
Save : This means saving the waveform currently on the virtual display panel to a computer or
other storage equipment. Select "Document" → "Save" and save it on the hard disk or
mobile external hard disk in *.dat format. Assign any file name you like.
Enable the "data transmission" function and select "Document" → "Record". A prompt
Record :
box shown in Fig 2-2 will pop up on the virtual display panel and recording of the
virtual display waveform begins. The recording prompt box shows the current
waveform recording progress. To pause recording, simply click the "pause" button. To
resume, click the "continue" button and recording will resume from the point where it
was paused.
The dialog box in Fig 2-3 appears when you close the waveform recording function or
recording has reached the maximum number of data screens. Click "YES" in Fig 2-3 to
save it in *.rec format on the computer hard disk or other storage device. If you wish to
abandon recording, press "NO" as shown in Fig 2-3. The waveform recording function
can record up to 1000 screens of data.
UTD4000 Digital storage oscilloscope communication control software Operating Manual and Installation Guide
Fig 2-2
Page 13 of 27
Fig 2-3