Table of Contents
Advertisement
3.3.11.5 [Date/time
]
Set instrument's date, time, and date-time format.
3.3.11.6 [Date setting]
Set date: set date displayed in spectrum analyzer. Input
format of date is YYYYMMDD, for example, October 1,
2009 is marked as 20091001.
3.3.11.7 [Time setting]
Set time: set time displayed in spectrum analyzer. Input
format of time is: HHMMSS, for example: 23:12:11 is
marked as 231211.
3.3.11.8 [Local network ]
M enu about network configuration pops up.
3.3.11.9 [IP address]
Set gateway's IP address.
3.3.11.10 [Subnet mask]
Set parameters of subnet mask.
58
3.3.11.11 [Gateway]
Set parameters of gateway address.
3.3.11.12 [Reset network]
Set reset network.
3.3.11.13 [Start-up/Reset ]
Soft menu for the setting of start-up parameters or reset
parameters of spectrum analyzer pops up.
3.3.11.14 [Start-up parameter
The setting of start-up parameters includes factory, user,
and power-off.
3.3.11.15 [Reset parameter
The setting of reset parameters includes factory, user, and
power-off.
3.3.11.16 [File ]
Enter file administration menu to operate files stored in
spectrum analyzer's internal or external USB storage device.
]
]
Advertisement
Table of Contents
