Screen Messages - Xerox 5222 System Administration Manual

Code
124-706
124-708
124-709
133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
133-226
133-280
133-281
133-282
133-283
133-700
133-710
134-210
134-211

Screen Messages

Along with fault codes, the following messages are displayed on the touch screen on
some occasions.
A fault has occurred.
Switch off the machine. Ensure that the
screen disappears before switching it on.
If the problem persists, call for service.
The folding setting was cancelled.
Check the folding setting, and try again.
The output destination was changed to the center tray. Check if the specified
size paper is loaded in a paper tray.
The document exceeded the maximum number of pages that can be stapled.
Reduce the number of pages, or cancel the stapling setting, then try printing
again.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
The specified country code is not supported. Contact the Xerox Welcome
Center.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
The staple/punch settings were cancelled. Specify appropriate staple/punch
positions.
The received fax data was printed using Tray 5 (Bypass), as the selected tray
was not available for fax printing.
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
Message
Description and Remedy
Description and Remedy
A fault has occurred. Switch off the machine
and wait until the touch screen is completely
off, and then restart the machine. If the
problem persists, write down the fault code
(xxx-yyy) displayed on the screen. Switch off
the machine and contact the Xerox Welcome
Center.
Fault Codes
419