Xerox 5222 System Administration Manual page 187

Feature
Connectivity Protocol
(continued)
Setting items
SNMP Configuration
Allows you to configure the following options when
accessing the machine via SNMP.
SNMP Properties:
Enable SNMP v1/v2c Protocols – Allows you to enable
or disable the SNMP v1/v2c protocols.
Edit SNMP v1/v2c Properties – Displays the page
which allows you to set the following SNMP v1/v2c
properties.
Community Names:
• Community Name (Read Only) – Enter the
community name used for display.
• Community Name (Read/Write) – Enter the
community name used for display and update.
Default Trap Community Name:
• TRAP Community Name – Enter the trap notification
community name.
System Administrator's Login ID:
• System Administrator's Login ID – Enter the ID of
the System Administrator.
Enable SNMP v3 Protocol – Allows you to enable or
disable the SNMP v3 protocol.
Edit SNMP v3 Properties – Displays the page which
allows you to set the following SNMP v3 properties.
This button is active only when the Secure HTTP (SSL)
feature is enabled.
Administrator Account:
• Account Enabled – Select to enable the System
Administrator's account.
• User Name – Displays the user name of the System
Administrator.
• Authentication Password (minimum 8 characters) –
Enter the authentication password using 8 to 32
characters.
• Confirm Authentication Password – Re-enter the
authentication password for verification.
• Privacy Password (minimum 8 characters) – Enter
the privacy password using 8 to 32 characters.
• Confirm Privacy Password – Re-enter the privacy
password for verification.
Print Drivers/Remote Clients Account:
• Account Enabled – Select to enable the print
drivers/remote clients account. This account allows
client computers and drivers a limited access to the
features on the machine. If the machine does not
have SNMP v1/v2c enabled, and does not have this
account enabled, SNMP clients will not be able to
communicate with the machine. The default
passwords should be used, unless the passwords
have been changed on client computers.
• Reset to default Password – Click this button to
reset your password to the default.
Properties
187