Table of Contents
Advertisement
Code
018-794
An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 94 (result no longer
available) during the address book query. Check the LDAP server status.
018-795
An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 95 (result still
available) during the address book query. Check the LDAP server status.
018-796
An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 96 (client loop
detected) during the address book query. Check the LDAP server status.
018-797
An LDAP server protocol error occurred in the address book operation. The
server returned the RFC2251 specification protocol error 97 (maximum number
of reference hops exceeded) during the address book query. Check the LDAP
server status.
024-742
The number of print pages for the Booklet Creation job exceeded the number of
maximum pages. Reduce the print pages or disable the Booklet Creation
feature.
024-746
The selected option (i.e., paper size, paper tray, output tray, or double-sided
printing) is incompatible with the specified paper type. Check the print
parameters.
024-747
An invalid print parameter combination was set. Check the print parameters.
024-748
In Bates Stamping settings, the number of digits specified in [Number of Digits]
does not match the value specified in [Starting Number]. For details on these
settings, refer to the Annotation feature in the Copy chapter of the User Guide.
024-775
Refer to 024-742.
024-985
An error occurred in the bypass tray. Check the document size, orientation and
paper type, and then try executing the same operation again.
026-700
A protocol which is not supported on the machine was received from the LDAP
server during the address book query. Try executing the same operation again.
Contact the Xerox Welcome Center if the problem persists.
026-701
The number of address book queries exceeded the handling capacity of the
machine. Wait a while, and perform the same operation again. If there was only
one address book query, the problem may be in the machine software. Contact
the Xerox Welcome Center.
026-702
The number of transactions from the LDAP server exceeded the handling
capacity of the machine. Wait a while and perform the same operation. Contact
the Xerox Welcome Center if the problem persists.
027-400
A communication error occurred. If another error message is displayed, clear
the problem first. If the control panel is being used by a user, wait until the user
operation is completed. If the machine is communicating with a remote device,
wait until the communication is completed.
If the problem persists even after you take the above actions, switch off the
machine, and then switch it on again. If the problem still persists, contact the
Xerox Welcome Center.
027-442
The auto stateless IPv6 address 1 of the machine is duplicated on the network.
Change the auto stateless IPv6 address 1 of the machine, or the address of the
other device.
Description and Remedy
Fault Codes
403
Hide quick links:
Advertisement
Table of Contents
