Paper Supply - Xerox 5222 System Administration Manual

NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the System Administrator. For information on setting the
paper size table, refer to

Paper Supply

NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the System Administrator. For information on setting the
paper size table, refer to
Tray 1, Tray 2, and Trays 3 & 4 (Two Tray Module)
Capacity: 500 sheets of 80 g/m
NOTE: The paper stack must not exceed 54 mm (2.1 inches) in height.
Paper Weights:
Paper Sizes: For width: 139.7 to 297.0 mm (5.5 to 11.8") / For length: 182.0 to 431.8
mm (7.2 to 17.2")
Auto Size Sensing: Yes
Tray 5 (Bypass)
Capacity: Approx. 100 sheets*
*: Standard paper 4200 3R2047 20lb
NOTE: The paper stack must not exceed 10 mm (0.4 inch) in height.
Paper Weight: 60 to 215 g/m
Paper Sizes: For width: 88.9 to 297.0 mm (3.6 to 11.8") / For length: 98.4 to 431.8 mm
(3.9 to 17.2")
Auto Size Sensing: Yes
Trays 3 & 4 (High Capacity Tandem Tray)
Capacity: Approximately 2,000 sheets (800/1,200 sheets)
Paper Sizes: A4 LEF, 7.25 x 10.5" LEF, 8.5 x 11" LEF
Paper Weight: 60 to 215 g/m
Tray 6 (High Capacity Feeder)
Capacity: Approximately 2,000 sheets
Paper Sizes: A4 LEF, 7.25 x 10.5" LEF, 8.5 x 11" LEF
Paper Weight: 60 to 215 g/m
Double-sided Module
Paper Sizes: For width: 148.7 to 241.0 mm (5.9 to 9.6") / For length: 98.4 to 162.0 mm
(3.9 to 6.4")
Paper Weight: 60-105 g/m
Paper Size Settings in the Setups chapter on page 78.
Paper Size Settings in the Setups chapter on page 78.
2
(20 lb bond) paper per tray
2
60 to 105 g/m for Tray 1
2
60 to 215 g/m for Tray 2, Trays 3 & 4, (Two Tray Module)
2
2
2
2
Specifications
423