15 Problem Solving
Stapler Faults
The following describes stapler troubles when the Finisher (optional) is installed.
Follow the procedures on the following pages when copies are not stapled or when
staples are bent. Contact your Xerox Welcome Center if the problem persists after you
have tried the following solutions.
CAUTION
• Be careful in removing jammed staples.
If staples are stapled on the copies in the manner shown in the figures below, contact
your Xerox Welcome Center.
354
Unstapled
One side of staple rising up
Flattened staple
Bent staple
Staple bent in reverse direction
Entire staple rising up
Staple rising up with
center pressed in