Figure 13-27 Connecting The Usb Cable To The Ct(U)-R Unit - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
S 4 I
ECTION NSTALLING
4.1
13 - 26
3.5.2 Connecting the CT(U)-R Unit to the PC
Connect USB cable from the PC to the CT(U)-R Unit as shown in
Figure 13-27 Connecting the USB Cable to the CT(U)-R

Figure 13-27 Connecting the USB Cable to the CT(U)-R Unit

3.5.3 Installing the Optional Headset
Install the headset and anchor it in the cord slot on the Multiline
Terminal as shown in
Multiline Terminal on page
3.5.4 Installing the Driver on the PC
Using the download from Web with the CT(U)-R Unit install the driver
on your PC. Refer to the CT(U)-R Unit installation instructions for
installing the driver.
U
NITS AND OTHER
HF-R Unit (Handsfree Unit)
The Handsfree Unit provides full-duplex handsfree communication for a
desktop user. Large or enclosed areas may cause poor full-duplex operation.
This unit comes with the handsfree adapter and an external microphone unit.
This adapter can be installed on any DTR/DTH Multiline Terminal except
DTR-2DT-1.
UNIVERGE SV8100/SV8300
Figure 13-23 Attaching the Headset to the
13-22.
D
EVICES
term
Installing D
Unit.
Series i Optional Equipment