Installing The Dcl-60-1 Console; Figure 7-66 Dcl-60-1 Console - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
7 - 58
Keep the following in mind when installing DSS Consoles:
A 60-Button DSS Console requires a separate digital station port
when pairing with a digital keyset. For IP terminals, the console is
connected to the side option slot using a special cable.
5.2.4.1

Installing the DCL-60-1 CONSOLE

1.
2.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Figure 7-66 DCL-60-1 CONSOLE

To prevent possible damage to the DCL-
60-1 CONSOLE or the DTL/ITL
multiline terminal during installation or
removal, disconnect the line cord/LAN
cable and the AC/DC adapter from the
DTL/ITL multiline terminal.
Remove both plastic panels from the front of the
multiline terminal.
Turn multiline terminal upside down.
Only one DCL-60-1 CONSOLE can be attached to the
DTL/ITL multiline terminal at a time.
UNIVERGE SV8100/SV8300