Figure 6-23 Cd-4Cotb Blade; Table 6-37 Cd-4Cotb Led Indications - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
6 - 72
5.1.2 Installation
Install the COIU blade into an available slot in the chassis. (Refer to
Figure 6-23 CD-4COTB Blade on page 6-70
blade.)
If the PZ-4COTF is to be used, install this prior to inserting the CD-4COTB
blade into the chassis.
5.1.3 LED Indications
LED indications for the CD-4COTB are listed in
CD-4COTB LED
function and LED and Operational status. Refer to
CD-4COTB Blade on page 6-70
blades.

Table 6-37 CD-4COTB LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
Indications. Each LED is listed with its associated
for the location of the LEDs on the
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
for a layout of the
Table 6-37
Figure 6-23
Remarks