Connecting Lan Cable - NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual

CONNECTING LAN CABLE

DT730/710
STEP 1: Prepare 10 BASE-T/100 BASE-T/TX cables
(Straight) for connecting the telephone to net-
work device such as HUB, PoE Switch.
STEP 2: Connect the telephone to the network device
using the LAN cable.
STEP 3: Thread the LAN cable through the groove on
the back of the telephone.
Telephone
LAN Straight Cable
STEP 4: When AC adapter is used to supply power to
the telephone, connect the AC/DC adapter to
the telephone as shown below.
AC Adapter Plug
To LAN
To PC
Groove
33
Connector for AC Adapter
Telephone
Groove
AC Adapter Cord