Figure 12-21 Attaching Directory Card Holder To The Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
2.
System Hardware Manual
Locate the two grooves on the top of the telephone as illustrated in
Attaching Directory Card Holder to the Multiline
card holder into the grooves on the Multiline Terminal until they snap into place.
To remove the directory card, press the two sides of the directory card holder inward until
the tabs release and pull the holder out of the grooves.
Grooves

Figure 12-21 Attaching Directory Card Holder to the Multiline Terminal

Figure 12-21
Terminal. Push the directory
Multiline Terminal
Directory Card
Holder
Issue 1.0
12 - 17