Figure 12-11 Connecting A Multiline Terminal To The System; Figure 12-12 Leading Line Cords On A Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
S 3 C
ECTION ONNECTING A
This instruction applies to all DTH/DTR/IP Electra Elite IPK Multiline Terminals except
DTR-2DT-1 TEL.
1.
2.
12 - 12
M
ULTILINE
Plug the telephone cord into the modular jack on the bottom side of the Multiline
Terminal. The handset is also attached to the bottom side of the Multiline
Terminal.

Figure 12-11 Connecting a Multiline Terminal to the System

Lead the telephone and handset cords through the applicable grooves.

Figure 12-12 Leading Line Cords on a Multiline Terminal

T S
ERMINAL TO THE
Installing D
UNIVERGE SV8100/SV8300
YSTEM
term
Series i Telephones