Power Requirements; Power Supply Specifications - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
6.2
System Hardware Manual
Connected Equipment
Music on Hold and Background Music Sources
External Amplifier
ITL Cabling

Power Requirements

A dedicated 60 Hz circuit located within seven feet of the chassis is
120VAC
required. A separate dedicated outlet for each chassis should be installed.
Double Pole/Neutral Fusing
(power supply fuses are located at both the L and N side).
6.2.1

Power Supply Specifications

AC Power Supply:
Dedicated 15 Amp circuit
Power Requirements: 120 VAC @ 15A Controlling/Base Chassis
Power Consumption: Base Chassis=324VA, Expansion
Chassis=324VA, total 1296VA
Input Voltage: 90VAC to 264VAC
(Rated Voltage: 100VAC/120VAC/220VAC - 240VAC)
Frequency: 45Hz - 66Hz (Rated frequency: 50/60Hz)
Phase and Wire: Single Phase, 2 Line + PE Type
Grounding Requirements: No. 14 AWG copper wire
Feeding Voltage: D
With input voltage of 120 VAC and with full load conditions:
Output Power: Base chassis=
544W
AC Input I: Base chassis=
VA @ 120V: Base chassis=
1296VA
Table 2-16 Cabling Requirements
term
/OPX/DID: -48V
SLT: 25mA / -28V
, Expansion chassis=
136W
, Expansion chassis=
2.7A
, Expansion chassis=
324VA
Issue 1.0
Cable
Hi-Fi Shielded Audio Cable
Hi-Fi Shielded Audio Cable
Cat 5 Straight Data Network
Cable – 328.1 ft (100m)
maximum distance.
136W
, total
2.7A
, total
324VA
, total
10.8A
2 - 29