Install Internal Batteries Chs2U-Us Chassis; Figure 5-69 Removing Battery Access Panel; Figure 5-70 Removing Access Panel - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
4.1.2

Install Internal Batteries CHS2U-US Chassis

An internal battery source using two batteries can be installed using
the CHS2U BATT MTG KIT (mounting kit) and CHS2U BATT CA INT
(internal cabling).
1. Remove screws from battery access panel on rear of chassis.

Figure 5-69 Removing Battery Access Panel

2. Remove access panel containing the fan. Refer to
Removing Access

Figure 5-70 Removing Access Panel

Panel.
Issue 1.0
Figure 5-70
5 - 55