Table 6-28 Cd-4Lca/Cd-8Lca Maximum Upgrade Capacities - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
6 - 58
The 4SLIU and 8SLIU are not rated for OPX use. A 4DIOPU blade
should be used instead (it supports the analog DID and single line
telephone interface functions, such as Off-Premise Extensions).
One extension status LED
Two blader status LEDs
Constant current type battery feeding (25mA / -28Vdc)
Feeding Polarity Reverse Ability
Connector for PZ-4LCA/PZ-8LCE Daughter Boards
Ring Generator
Caller ID Sending Ability
Message Wait Lamping Ability
The CD-8LCA consumes eight ports ranging between ports
001~256. The CN3 and CN5 connectors each provide connection to
four analog station ports. The CNx connectors are not polarity
sensitive.

Table 6-28 CD-4LCA/CD-8LCA Maximum Upgrade Capacities

19"
SLIU Chassis
with CPU
5
CD-4LCA
5
CD-8LCA
4.3.2 Installation
Install the CD-4LCA
slot.
19" Chassis
without CPU
6
6
When connecting a fax machine or analog
modem, make sure to set Program 15-03-03 to
1 (special terminal) to avoid communication
problems.
The SLIU and SLIDB are categorized as
TNV2. With this designation, off-premise
wiring is not acceptable. Any cabling to the
SLIU blade must be within the building – no
outside cabling is permitted.
Branch connection is not acceptable.
/
CD-8LCA blade into any available universal
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
19" Chassis Networked
x4 Chassis
23 32
23 32