Figure 8-49 Inserting Screws For Wall Mounting; Figure 8-50 Wrapping The Ac Adapter Cord Around The Strain Relief - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
6.7
System Hardware Manual
Wall Mounting the Charging Unit
The charging unit is also designed to be wall mounted. Before mounting the
charging unit, consider the following:
Select a location away from electrical cables, pipes, or other items behind
the mounting location that could cause a hazard when inserting screws into
the wall.
Make sure the wall material is capable of supporting the weight of the
charging unit.
Use #10 screws with anchoring devices suitable for the wall material where
the charging unit will be placed.
To mount the charging unit:
1. Insert two mounting screws one inch apart. Allow about 3/16 of an inch
between the wall and screw heads for mounting the telephone.

Figure 8-49 Inserting Screws for Wall Mounting

2. Plug the AC adapter into the charging unit. Wrap the AC adapter cord
around the strain relief.

Figure 8-50 Wrapping the AC Adapter Cord Around the Strain Relief

Issue 1.0
8 - 39