Figure 3-2 System Configuration Example (Ip-Oriented System) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
Item
DTMF Receiver
Caller ID Sender
3/4-Party Conference
2U = Expansion Chassis
= When using D
parenthesis are required in addition to the physical ports for Multiline Terminal.
= accommodated at main unit (UNIT#1) only
= The total number of following functions is maximum 52 per Unit.
- Caller ID Receiver
- MF Receiver
- DTMF Receiver
- Caller ID Sender
3.1
System Hardware Manual
Table 3-2 SV8300 Maximum System Capacity (Continued)
1 Unit
2Ux 2Ux
1 2
16
term
Series i with APR (Dual Port Mode), the physical ports for analog station shown in
System Configuration – SV8300
The SV8300 consists of a CHS1U-US chassis and CHS2U-US chassis
depending on the system configuration. The CC-CP00 blade in the
CHS1U-US chassis can control a maximum of three CHS2U-US Chassis,
collectively called (a "UNIT"). The SV8300 can be configured for a maximum
of four UNITs.

Figure 3-2 System Configuration Example (IP-Oriented System)

system configuration IP-oriented example,
Example (TDM-Oriented System on page 3-8
and Figure 3-4 System Configuration Example (Remote Unit Over IP System)
on page 3-8 gives a Remote Unit over IP configuration example.
Maximum of 1024 IP Ports per System
Figure 3-2 System Configuration Example (IP-Oriented System)
2 3
Units Units Units
2Ux 2Ux 2Ux
3 6 9
32
16
32
Figure 3-3 System Configuration
Legacy
Trunk
SV8300
4
System Maximum
2Ux
Standalone Remote Unit
12
32
16
32
shows a
shows a TDM-oriented system
LAN
Issue 1.0
32
16
32
3 - 7