• TO CONFIRM THE ANGLE ADJUSTMENT
Confirm that the tilt leg and the stoppter are joined
correctly. If they are not joined correctly, join the
stopper's junction to the recessed point of the tilt leg.
Recessed Points of Tilt Leg
Stoppter's Junction
CONNECTING LAN CABLE
DT830
STEP 1: Prepare 10 BASE-T/100 BASE-TX/
1000BASE-T (8LDG only) cables (Straight)
for connecting the telephone to network de-
vices such as HUB or PoE Switch.
STEP 2: Connect the telephone to the network device
using the LAN cable.
STEP 3: Thread the LAN cable through the groove on
the back of the telephone.
Telephone
LAN Straight Cable
26
To LAN
To PC
Groove