Table 6-19 Voipdb Maximum Upgrade Capacities - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
6 - 44

Table 6-19 VOIPDB Maximum Upgrade Capacities

maximum capacities for the VOIPDB blades when they are
upgraded.
Table 6-19 VOIPDB Maximum Upgrade Capacities
19"
VOIPU Chassis
with CPU
PZ-32IPLA 1
PZ-64IPLA 1
PZ-128IPLA 1
When installing a VoIPDB blade, the system allocates the maximum
number of trunk ports for the blade being installed.
This daughter board is installed on either the CD-CP00-US or the
CC-CP00.
3.5.2 Installation
To install a PZ-32IPLA/PZ-64IPLA/PZ-128IPLA on the CD-CP00-US
or CC-CP00 :
1. With the system power off, remove the CD-CP00-US or
CC-CP00.
2. Install the VOIPDB onto the CD-CP00-US or CC-CP00 blade.
3. Insert the CD-CP00-US into slot 1 in the Controlling Chassis or,
the CC-CP00 into the CHS1U-US.
Refer to
4-28
4. Connect the VOIPDB to the CD-RTB or to an external
switching hub using an ethernet cable.
5. Refer to the Univerge SV8100 Programming Manual for
detailed programming instructions.
3.5.3 Switch Settings
These daughter boards do not have any switches that need to be set
and do not require any hardware setting.
19" Chassis
without CPU
0
0
0
Do not remove or install the CD-CP00-US or
CC-CP00 with the power on.
Figure 4-25 19" Controlling Chassis – Guides Slot 1 on page
for more details.
Installing the SV8100/SV8300 Blades
UNIVERGE SV8100/SV8300
provides the
19" Chassis Networked
x4 Chassis
0 50
0 50
0 50