Connecting Lan Cable - NEC DT730G (CG): ITL-12CG-3 User Manual

1.
STEP 4:
Lift both ends of Tilt Legs until they come
together.

• Connecting LAN Cable

Connect the LAN cable to the terminal using the
following:
An ILPA-R UNIT is required when PoE Hub supports
NEC Proprietary Protocol (The ILPA-R UNIT converts
IEEE802.3af to NEC Proprietary Protocol). When an
ILPA-R UNIT is used, the 1000BASE-T is not available.
For details, contact the System Administrator.
STEP 1:
Plug the power cable into the AC adapter
connector when power is supplied with AC
adapter. This step is not required when PoE
hub is used.
STEP 2:
Gently press the cable into the grooved
cutout.
STEP 3:
Connect LAN cable to LAN cable connector
(LAN (=)) of the terminal.
STEP 4:
Press the LAN cable into the groove.
11