Protocol-Based Vlan - Planet IGS-5225 Series User Manual

• Adding a New IP
subnet-based VLAN
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.

4.3.3.11 Protocol-based VLAN

This page allows you to add new protocols to Group Name (unique for each Group) mapping entries as well as allow you to see
and delete already mapped entries for the switch. The Protocol-based VLAN screen in
The page includes the following fields:
Object
• Delete
• Frame Type
default, no ports are members and all boxes are unchecked.
Click to add a new IP subnet to VLAN ID mapping entry. An empty row is added
to the table, and the mapping can be configured as needed. Any IP
address/mask can be configured for the mapping. Legal values for the VLAN ID
are 1 to 4095.
The IP subnet to VLAN ID mapping entry is enabled when you click on "Apply".
The delete button can be used to undo the addition of new mappings. The
maximum possible IP subnet to VLAN ID mappings are limited to 128
Figure 4-3-3-18: Protocol to Group Mapping Table Page Screenshot
Description
To delete a Protocol to Group Name map entry, check this box. The entry will be
deleted on the switch during the next Save.
Frame Type can have one of the following values:
User's Manual of IGS-5225 series
Figure 4-3-3-18
185
appears.