• Mode
Buttons
: Click to add a new VLAN range.
: Click to apply changes
:
Click to undo any changes made locally and revert to previously saved values.
2. input the VLAN range that you want to disable.
3. choose Mode to be Disabled.
4. press "Apply" to apply the change.
Then, you will see the disabled VLAN range is removed from the DHCP Server
mode configuration page.
Indicate the operation mode per VLAN. Possible modes are:
Enabled: Enable DHCP server per VLAN.
Disabled: Disable DHCP server pre VLAN.
133
User's Manual of IGS-5225 series