Ace Configuration - Planet IGS-5225 Series User Manual

Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page; any changes made locally will be undone.
: Click to clear the counters.
: Click to remove all ACEs.

4.5.5.3 ACE Configuration

Configure an ACE (Access Control Entry) on this page. An ACE consists of several parameters. These
parameters vary according to the frame type that you select. First select the ingress port for the ACE, and
then select the frame type. Different parameter options are displayed depending on the frame type selected. A
frame that hits this ACE matches the configuration that is defined here. The ACE Configuration screen in
Figure 4-5-5-3
: Inserts a new ACE before the current row.
: Edits the ACE row.
: Moves the ACE up the list.
: Moves the ACE down the list.
: Deletes the ACE.
: The lowest plus sign adds a new entry at the bottom of the ACE listings.
appears.
Figure 4-5-5-3: ACE Configuration Page Screenshot
User's Manual of IGS-5225 series
361