Planet IGS-5225 Series User Manual page 54

Tighten the wire-clamp screws for preventing the wires from loosening.
Model Name
IGS-5225-4UP1T2S
IGS-5225-8P2T2S
IGS-5225-8P4S
IGS-5225-4P2S
IGS-5225-4T2S
1. The wire gauge for the terminal block should be in the range of 12 ~ 24 AWG@25 degrees C.
2. When performing any of the procedures like inserting the wires or tightening the wire-clamp screws,
make sure the power is OFF to prevent from getting an electric shock.
1 2 3
DC 1
Figure 2-14 6-Pin Terminal Block Power Wiring Input
Positive (+) Pin Negative (-) Pin
Pin 1/5 Pin 2/6
Pin 1/5 Pin 2/6
Pin 1/5 Pin 2/6
54
User's Manual of IGS-5225 series
4 5 6
DC 2
Input Voltage
DC 48~56V
DC 48~56V
DC 48~56V