Planet IGS-5225 Series User Manual page 269

• HW Domain
• Device Type
• Profile
• Apply Profile Defaults
• Filter Type
Port Enable and Configuration
Object
• Port Enable
• Configuration
The port data set is defined in the IEEE 1588 Standard. It holds three groups of data: the static members, the dynamic members,
and configurable members which can be set here.
Port Data Set
Indicates the HW clock domain used by the clock.
Indicates the Type of the Clock Instance. There are two Device Types.
■ P2p Transp - clock's Device Type is Peer to Peer Transparent Clock.
■ E2e Transp - clock's Device Type is End to End Transparent Clock.
Indicates the profile used by the clock.
If the clock has been configured to use a profile, clicking the 'Apply' button will reset
configured values to profile defaults.
The PTP filter type determines should match the operating conditions of the network
and the PTP profile.
Description
Set check mark for each port configured for this Clock Instance.
Click 'Ports Configuration' to edit the port data set for the ports assigned to this
clock instance.
269
User's Manual of IGS-5225 series