Planet IGS-5225 Series User Manual page 88

Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the Users.
: Delete the current user. This button is not available for new configurations (Add new user).
Once the new user is added, the new user entry is shown on the Users Configuration page.
If you forget the new password after changing the default password, please press the "Reset"
button on the front panel of the Industrial Managed Switch for over 10 seconds and then release
it. The current setting including VLAN will be lost and the Industrial Managed Switch will restore
to the default mode.
By default setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system maintenance
(software upload, factory defaults and etc.) needs user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account,
privilege level 10 for a standard user account and privilege level 5 for a guest
account.
Figure 4-2-6: User Configuration Page Screenshot
88
User's Manual of IGS-5225 series