Planet IGS-5225 Series User Manual page 392

L2+ ring managed gigabit ethernet switch
Hide thumbs Also See for IGS-5225 Series:
Table of Contents

Advertisement

• Force Power
• Priority
meet all PoE PD types for various PoE applications.
Setting the Right Power Inline Mode for Each Application:
Midspan: Set inline mode to IEEE 802.3at PoE+ Mid-span PSE.
Pins 4-5 (pair #1 in both T568A and T568B) form one side of
the DC supply and pins 7-8 (pair #4 in both T568A and T568B)
provide the return.
Maximum power is 36.0 watts.
Endspan: Set inline mode to IEEE 802.3at PoE+ End-span PSE.
Pins 1-2 (pair #2 in both T568A and T568B) form one side of
the DC supply and pins 3-6 (pair #3 in both T568A and T568B)
provide the return.
Maximum power is 36.0 watts.
802.3bt: Set inline mode to IEEE 802.3bt PoE++ Type-4 or Type-3 PSE.
Pins 1-2 (pair #2 in both T568A and T568B) form one side of
the DC supply and pins 3-6 (pair #3 in both T568A and T568B)
provide the return.
Pins 4-5 (pair #1 in both T568A and T568B) form one side of
the DC supply and pins 7-8 (pair #4 in both T568A and T568B)
provide the return.
Maximum power is 90~60 watts.
UPOE: Set inline mode to PoH (Power over HD-BASE-T) 4-pair PoE+ PSE
Pins 1-2 (pair #2 in both T568A and T568B) form one side of
the DC supply and pins 3-6 (pair #3 in both T568A and T568B)
provide the return.
Pins 4-5 (pair #1 in both T568A and T568B) form one side of
the DC supply and pins 7-8 (pair #4 in both T568A and T568B)
provide the return
Maximum power is 72-60.0 watts
It allows user to enable force power function in a specified PoE Inline mode.
Once the force power is enabled, the PoE port will ignore the PoE classification
behaviors and directly deliver power over UTP cable no matter what Ethernet
device is attached, or even there is no Ethernet cable plugged.
Please be careful when using force power function and make sure the remote
device is PoE powered device (PD).
Maximum power is 60 watts when PoE Inline mode is configured to 8023bt or
UPOE mode.
The Priority represents PoE ports priority. There are three levels of power priority
named Low, High and Critical.
392
User's Manual of IGS-5225 series

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents